ESPRESSObin U
ltra
- Quick Start Guide
page: 1
1
/
24
11
/
24
G
.
Start running ESPRESSO
bin
U
ltra
1.
Check U-boot version and some system information
Power on the board then press enter to terminate uboot running, you can see messages on screen like the
followings
Ubuntu 18.04 LTS ccpe999904 ttyMV0
######################################
the default root password is 'admin'.
######################################
ccpe999904 login: TIM-1.0
WTMI-devel-18.12.1-67f01b7
WTMI: system early-init
SVC REV: 5, CPU VDD voltage: 1.213V
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.5(release):711ecd32 (Marvell-armada-18.09.4)
NOTICE: BL1: Built : 15:20:15, Sep 18 2019
NOTICE: BL1: Booting BL2
NOTICE: BL2: v1.5(release):711ecd32 (Marvell-armada-18.09.4)
NOTICE: BL2: Built : 15:20:18, Sep 18 2019
NOTICE: BL1: Booting BL31
NOTICE: BL31: v1.5(release):711ecd32 (Marvell-armada-18.09.4)
NOTICE: BL31: Built : 15
U-Boot 2017.03-armada-18.09.1-g51aa6c4772 (Sep 18 2019 - 15:19:13 +0800)
Model: gti cellular cpe board
CPU 1200 [MHz]
L2
1200 [MHz]
NB AXI 300 [MHz]
SB AXI 250 [MHz]
DDR 750 [MHz]
DRAM: 1 GiB
U-Boot DT blob at : 000000003f716f38
SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB, total 4 MiB
Comphy chip #0:
Comphy-0: USB3_HOST0
Comphy-1: PEX0 2.5 Gbps
Comphy-2: SATA0
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link up
MMC: sdhci@d8000: 0
Net: eth0: neta@30000 [PRIME]
Hit any key to stop autoboot: 0
Marvell>> <INTERRUPT>
