Please carefully read the instructions before assembling and using the
product. Keep the instructions for future reference.
Be careful when unpacking and assembling the product.
This product must be assembled by a responsible adult.
Remove all the parts which are not necessary for play before giving the
product to your child.
Warning! Do not step or stand on back of frame which will cause product
overturned.
Tricycle mode: Warning! Not to be used by children over 36 months;
insufficient strength to support.
HOW TO ASSEMBLE EXPLORER TRIKE 2in1
1. The front wheel’s fork needs to be aligned with the frame of the trike;
then insert the stem of the front wheel’s fork into the frame.
2. Take the handlebars and align them with the front wheel by making
sure the stem of the front wheel’s fork slots into the handlebars’
column. Make sure the handlebars are placed in the correct direction
with the top column facing outwards, away from the seat. Push the
handlebars down until you hear a click to securely fix them in place.
3. Turn the pedal locks of the front wheel in the direction of the unlocked
symbol; place the pedals in the front wheel’s slots. Turn the pedal
lock in the direction of the locked symbol to secure the pedals in the
front wheel. You may need to hold the opposite pedal lock to ensure
that the pedal doesn’t spin freely.
4. To install the rear wheels, you need to unscrew the knob at the end of
the wheel assembly. The brakes of the rear wheels must be pointing
inward when they are installed for all trike stages. Place the wheel in
the hexagonal slot at the rear of the trike frame and ensure that the
brake is upwards and doesn’t touch the ground. Once the wheel is
in the correct position, you need to re-screw the knob back into the
wheel slot to ensure the wheel will remain securely in place.
5. To insert the saddle, you must first open the clamp and press the
bottom spring-loaded button on the saddle stem. Then, push the
saddle down until you hear a click. Close the clamp. The saddle
is adjustable with 2 available heights (31cm; 34cm). The minimum
insertion depth is where “MAX” is marked on the stem when placing
the top spring-loaded button in the saddle’s stem hole. This is the
highest height of the saddle. The maximum insertion of the saddle is
pushing the saddle down until the saddle’s stem is all the way down.
This is the lowest height of the saddle.
TRANSFORM TRAINING TRIKE TO BALANCE BIKE
1. Unscrew the knob at the end of the wheel assembly. Place the wheel
inside of the Trike frame. Slide the wheel in the hexagon shaped hole
and screw back the knob onto the wheel. Repeat the procedure for
the other wheel. Make sure the brakes do not touch the ground.
2. Put the pedal lock of the front wheel in the unlocked position.
Remove the pedals from the wheel; you can store them at the rear of
the saddle.
• Warning! Protective equipment should be worn. Not to be used
in traffic. Always wear safety equipment (helmet, elbow-pads,
kneepads, gloves).
• Braking for walking bike
: The product can be braked with the feet.
The child can stop moving by stopping walking/running. Please take
care that your child can always stop from the speed it produces and
wears appropriate shoes.
GENERAL INSTRUCTIONS OF USE:
- Prior to use, make sure that the product has been assembled properly.
Check all the connection elements must be correctly adjusted and
make sure that the locking mechanisms are securely locked. Check the
product before the child rides to determine if there are any potentially
hazardous parts or conditions.
- Children should be supervised by adult while riding this product. Special
care should be taken to instruct children in safe riding.
- Do not use on the public highways, examples of safe riding area: To be
used on flat and no gravel areas (playground, Public Square)
- Do not use this product near a staircase, on a slope, on a road or on a
wet surface.
- More mobility child grows; the more potential hazards increase. At
home, be sure to remove frames or mirrors hung too low and could
break, and any object that could fall in the event of impact. Corner table
can also be a danger.
- Do not allow more than one rider on the product at a time.
- Be sure the child wears clothes and appropriate footwear when using
product.
- Be sure the rider keeps both hands on the handlebars for proper
control.
8
ENGLISH
