MOTION
This product has a feature that allows you to observe movements of objects
in on the screen, hence a single individual can conduct supervision efficiently.
The camera detects an object's movement by sensing disparity of outline,
and level of brightness and color.
DZOOM
Digital P/T/Z are used to create a zoom lens effect. Zoom Factor (1X to 4X)
Pan(
±
100%, center of image can be moved to left and right edges of screen)
Tilt(
±
100%, center of image can be moved to top and bottom edges of screen)
ㆍ
By Selecting ON, DZoom is
enabled.
ㆍ
By Selecting OFF, DZoom is
disabled.
DZOOM
ZOOM
PAN
PREVIOUS PAGE
-----------
-100
100
TILT
-----------
-100
0
0
100
-----------
1
4
SPECIAL
CAMERA ID
OFF
DAY&NIGHT
AUTO
FLIP
OFF
DZOOM
ON
OFF
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
SPECIAL
CAMERA ID
OFF
DAY&NIGHT
AUTO
FLIP
OFF
DZOOM
OFF
ON
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
ㆍ
White : MOTION ZONE Position movement
Green : MOTION ZONE Size enlargement
Red : MOTION ZONE Size reduction
ㆍ
For MOTION ZONE Confirm, long press SET button
MOTION DETECTION
PREVIOUS PAGE
MOTION ZONE..
ACTIVITY THR.
------------
0
25
255
MOTION ZONE SETUP
PRIVACY MASK SETUP
Hide an area you want to hide on the screen.
SPECIAL
CAMERA ID
OFF
DAY&NIGHT
AUTO
FLIP
OFF
DZOOM
OFF
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
PRIVACY MASK SETUP
PRIVACY MASK OFF
MASK COLOR
WHITE
PREVIOUS PAGE.
ENABLE MASKS (1 to 6)
MASK 1
ON
MASK 2
OFF
MASK 3
OFF
MASK 4
OFF
MASK 5
OFF
MASK 6
OFF
PREVIOUS. NEXT.
ENABLE MASKS (7 to 12)
MASK 7
OFF
MASK 8
OFF
MASK 9
OFF
MASK 10
OFF
MASK 11
OFF
MASK 12
OFF
PREVIOUS.
ㆍ
White : PRIVACY-ZONE Position movement
Blue : PRIVACY-ZONE Size enlargement
or reduction
ㆍ
For PRIVACY-ZONE Confirm, long press
SET button
■
Advanced Page Menu
VIDEO I/O
Choose video system between PAL and NTSC by moving the selector.
RESOLUTION
Choose resolution between high and normal with the selector (RIGHT/LEFT)
ㆍ
The high resolution supports
Progressive Rate video up to
540 TV Line and normal resolution
supports 480 TV Line.
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
HIGH
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
PAL
VIDEO LEVEL
PREVIOUS PAGE
COLOR BAR
OFF
110
-------------
80
150
ADVANCED SETUP
VIDEO I/O
PAL
NTSC
RESOLUTION
NORMAL
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
BACKLIGHT
Backlight is feature of a Camera which compensates when there is a large
amount of background light.
SYNC
Two sychronisation modes are available, INTERNAL and EXTERNAL
LINE LOCK. In LINE-LOCK mode, it synchronises the video signal between
cameras without a synchronous generator. The line-lock synchronisation
is only used in areas of 60Hz (NTSC) / 50Hz (PAL).
- INT : Internal synchronisation
- LL : External line-lock synchronisation
ㆍ
If 'LL' is selected, it can be adjusted
to the desired phase.
Press the SET button.
ㆍ
Adjust to the desired phase from
0 to 624.
LINE LOCK
V PHASE
PREVIOUS PAGE
519
-------------
0
624
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
LL
INT
VERSION (D25-3.1)
RS485 SETUP
ㆍ
When Backlight is ON, Back Light
gets activated.
ㆍ
White : BL-ZONE Position movement
Green : BL-ZONE Size enlargement
Red : BL-ZONE Size reduction
ㆍ
For BL-ZONE Confirm, long press
SET button
BL-ZONE
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
BACKLIGHT
ON
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
SHARPNESS
The outline of the video image becomes cleaner and more distinctive as the
level of SHARPNESS increases. If the level gose up excessively, however,
it may affect the video image and generate noise.
ITEM
NTSC
PAL
Image Sensor
Effective Pixels
Dynamic Range
Horizontal Resolution
Scanning Frequency
Min. Illumination
Day & Night
White Balance
Erectronic Shutter
DNR
Privacy Masking
AGC
Camera ID
S/N Ratio
Video Output
Sync. System
Operating Humidity
Operating Temp.
Weight
Power Supply
Pixim's 1/3" DPS ORCA CMOS
720(H) x 540(V)
120dB(Max), 102dB(Typical)
Max 540TV Lines
15.734KHz(H), 59.944(V)
0.8 Lux (F/1.2, 50IRE)
D&N Function by Digital Change(Auto/Off)
Auto / AWB / Manual
up to 1/22,000 sec
Auto / High / Low
12 Zones
Low / Auto / High / Off
On / Off
More than 50dB
Composite video output 75 ohm terminated
Internal
30% ~ 90% RH
-10
˚
C to 50
˚
Approx. 55g
DC12V
±
10% (Max. 170mA)
ㆍ
The available range of level is -8 ~ 8
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
The outline of the video image becomes cleaner and more distinctive as the
level of APERTURE increases. If the level gose up excessively, however,
it may affect the video image and generate noise.
APERTURE
ㆍ
The available range of level is -8 ~ 8
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
RS485 SETUP (Option)
This function sets up the camera communication status when controlling the
camera through an external control device.
RS485 SETUP
PREVIOUS PAGE
PROTOCOL : PELCO-D 2.4K
1 < 1 > 255
CAMERA
# :
ADVANCED SETUP
VIDEO I/O
PAL
RESOLUTION
NORMAL
BACKLIGHT
OFF
SHARPNESS
-8 ---------- 8
-8 ---------- 8
APERTURE
RETURN
SYNC
INT
VERSION (D25-3.1)
RS485 SETUP
■
Specifications
■
Special Page Menu
CAMERA ID
User can enter a unique name for the respective camera.
The maximum length of the ID is ten characters.
ㆍ
You can choose the ON and OFF
with the selector. If you select ON,
the entered camera ID is displayed
at the selected position in the video
picture (normal operation).
ㆍ
Please select the setup button while
in ON mode.
ㆍ
Select the desired position with the
selector.
CAMERA ID
ID
CAM-001
POSITION
UP-LEFT
PREVIOUS PAGE.
①
Move the cursor to the letter
required by using the Set-Up button.
②
Select an ID from A,B~Y,Z, a,b~y,z
0,1~8,9 by using the LEFT and
RIGHT buttons.
③
Repeat the above steps until the ID
is complete.
CAMERA ID
ID
CAM-001
POSITION
UP-LEFT
PREVIOUS PAGE.
①
Select the position where the ID
is to be displayed by using the
LEFT and RIGHT buttons.
SPECIAL
CAMERA ID
OFF
ON
DAY&NIGHT
AUTO
FLIP
OFF
DZOOM
OFF
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
FLIP
Select "OFF" to show the image as normal. Select "ON" to reflect image horizontally.
DAY & NIGHT
This camera has a function that automatically selects the mode that is appropriate
for daytime or night-time conditions. The COLOR mode operates in daytime
conditions to provide optimum colors, and BW mode operates in nighttime
conditions to enhance the definition of the image.
SPECIAL
CAMERA ID
OFF
DAY&NIGHT
AUTO
BW
COLOR
FLIP
OFF
DZOOM
OFF
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
DAY & NIGHT SETUP
COLOR
→
BW
BW
→
COLOR
PREVIOUS PAGE
-----------
16
0
60
TIME DELAY
-----------
5
0
20
24
-----------
0
60
PRIVACY MASK SETUP
SPECIAL
CAMERA ID
OFF
DAY&NIGHT
AUTO
FLIP
OFF
HORIZ
VERT
BOTH
DZOOM
OFF
OFF
MOTION
RESET
RETURN
ADVANCED SETUP
PRIVACY MASK SETUP
BOTH
VERT
HORIZ
OFF
