5
1.4 Using the Labdisc
CHARGE THE LABDISC BATTERY BEFORE STARTING
Before working with the
Labdisc
for the first time, the unit should be charged for
six hours with the supplied 12 V charger. The
Labdisc
charging input is located to
the left of the
On/Off
key. Simply rotate the orange ring until the charging input on
the
Labdisc
is exposed and then connect the
charger plug to the charging input.
The
Labdisc
charger will accept any input voltage ranging from 100 to
240 VAC 50/60 Hz, making it functional worldwide.
Labdisc
charging
input
