&)#1% $ % -#4'% - 7 -&1#) &1#- "%-
•
ALWAYS use personal protection equipment as recommended by the manufacturer of the
chemical you are applying, i.e. gloves, faceshield, respirator, coveralls etc.
•
NEVER eat, drink or smoke whilst dealing with spray chemicals, until after you have removed
any protective clothing and washed your hands thoroughly.
•
ALWAYS check the condition of the sprayer, especially security of joints and connections
before each use. Proper operation of the relief valve should also be checked regularly - See
relief valve testing under MAINTAINING THE SPRAYER.
•
NEVER mix chemicals unless recommended by the chemical manufacturer.
•
ALWAYS read and follow the chemical manufacturers instructions.
•
NEVER mix more chemical than you will need to use at one application.
•
ALWAYS use genuine GLORIA parts to repair the sprayer.
•
NEVER attempt to clear a blocked spray nozzle by blowing through it with your mouth.
•
NEVER leave the sprayer exposed to hot sun.
•
NEVER store spray chemical in the sprayer.
•
ALWAYS avoid spraying in windy weather.
•
ALWAYS release the pressure, empty and clean the sprayer thoroughly after each use.
TECHNICAL SPECIFICATIONS:
141T
176T
142T
172RT
Working capacity
5 litres
5 litres
10 litres
10 litres
Total capacity
8 litres
8 litres
13.7 litres
13.7 litres
Maximum operating pressure
All models
6 bars (90psi)
Maximum operating temp.
All models
+ 50 deg. C
Safety features
All models
Pressure gauge
Relief valve
Container material
Stainless steel
Galvanised steel
Stainless steel
Galvanised steel
Seal material
All models
Viton
Spray nozzle
Either variable type, adjustable from a 0 degree pencil jet, to 60 degree, hollow conespray pattern,
or GPS Universal Nozzle Holder with specific, fixed spray pattern, interchangable spray tip.
These are high specification sprayers, suitable for applying a wide variety of sprayable products.
There are however, many liquids which are either not safe to be sprayed, or which may damage
your sprayer. Acid and alkaline (caustic) chemicals should not be used in these sprayers; they can
cause premature corrosion failure of most metal components. If in doubt concerning a chemicals’
safety or compatibility, please consult the chemical manufacturer before using it.
PLEASE READ THIS LEAFLET THOROUGHLY AND KEEP IT FOR FUTURE REFERENCE. FOLLOW
THE INSTRUCTIONS CAREFULLY AND OBSERVE THE RULES BELOW FOR SAFER SPRAYING
Summary of Contents for Spezial 141 T
Page 1: ......
