Glorious GZ5 Operation Manual/
12
4.4 Material Saving Mode Fixture Adjustment Method
No.
①
is the standard secondary fixture (included in the Factory packing box );
No.
②
is the plastic secondary fixture.
Adjustment Method:
1) Turn off the machine, turn to the back of the fixture, remove the three secondary
fixture fixing screws, and remove fixture No.
①
.
2) Replace the fixture cover on fixture No.
②
, and glue the rubber block No.
②
and
the zirconia block with glue.
* The plastic secondary clamp has a clamping position to ensure that the material is
in a fixed position each time when it is clamped. There is no need to draw a mark and
mark each time when it is clamped. It can also cut the edge of the denture on the
plastic secondary clamp, which is more convenient than the semicircular clamp
Typesetting, saving the materials.
* Plastic secondary fixture are disposable consumables, which is used for one plate
at a time and can buy from the machine supplier.
4.5 CERCON Φ105mm Large Size Fixture Adjustment Method
