Glorious GZ5 Operation Manual/
14
2) After waiting for automatic reset, load a wax disc or low hardness resin disc with a
thickness of Φ98*10-14mm, and click
[FILE]
to read the calibrated processing file.
3) Select the calibration block file Calibrate304 around or in the middle of
Calibrate304 (the difference between the two is limited to the different layout
positions, which can be selected according to the remaining material), and the
material rotation angle can be installed for multiple cuttings next time.
【
Calibrate304 Around
】
【
Calibrate304 Middle
】
