Glorious GZ5 Operation Manual/
2
D) Automatic tool calibration, when the tool attrition exceeds 0.05mm in a tool
path
；
E)Tool breaks during cutting
；
F)When tool number is wrong ; Force the spindle not to clamp the tool before the
program is run; put the tool back to the tool library after processing,prevent the user
placing the wrong knife
。
Feature two Friendly Human-Computer Interface
The equipment comes with a touchable operation panel and WIFI built in,which can
be remotely controlled
，
and convenient for training
，
diagnosis and maintain
。
Each equipment has an independent ID. When the equipment has a problem, the
manufacturer can perform remote diagnosis and maintenance based on the ID; these
can reduce the issue solving time.
Feature three Open CAM System
The equipment is compatible with any CAM system on the market
，
such as
：
WorkNC
、
Millbox,Sum3D,Hyperdent,etc.
Feature four Large-Angle 5-Axis 5-Linkage Cutting
The angle of the A-axis can be ±25; the angle of the B-axis can be 0~360; and 5-axis
5-linkage processing.
