Glorious GZ5 Operation Manual/
9
H. Main power switch:
Turn on this button for the daily use of the machine. And you
need to turn off it when the machine is not been used for a long time or transported.
Please be fouced that you should turn off the standby power button normally before
turning off the main power switch.
Equipment Operation Guidance
4.1 How To Use
1) Preparation before starting:
Check the air pressure, and the Digital display
barometer on the back of the machine, whose value should be about 600
(450≤PA≤700).
2) Turn on the machine:
First,turn on the main power switch, and then press and
hold the standby power button for 3 seconds to turn on the machine.
3) The control panel is opened and the indicator light turns from green to yellow:
After the machine is turned on, it will automatically open the machine control panel
and return to the origin.
4) Place the tool:
Place the tool according to the number marked on the tool library,
No. 1 R1.0*L18 /No.2 R0.5*L16 / No.3 R0.3*L10.
5) Reconfirm that the tools are placed correctly.
6) Confirm that there are no other residues in the working cabin.
7) Load the machinable material.
8) Transfer the file and start processing .
Press
[FILE]
to call the processing file,
press
[RUN]
to start processing.
4.2 Precautions
1) During processing, press
[STOP]
to pause processing, and press
[RUN]
to
continue .
2) After the processing is completed, the machine will return to the origin again, and
then you can remove the machinable material.
3) Clean regularly (once a day), press
[CLEAN]
to flip the fixture, and vacuum with a
cleaner manually, After cleaning, press the standby power button on the left side of
the display to turn off the power. If the machine is not used for a long time, please
Turn off the main power switch on the back of the machine.
4) Regular maintenance (according to actual usage) to reduce machine failures and
