Manual for
FP Board
15
(Pic7)
If you use the double faced adhesive tapes for the installation, this problem can be solved by use some cards (for example: name
cards) to insert between the flat surface and base of the FP Board.
(Pic 9)
(White line is located at the left of the screen, please inserts the cards to the left side of the base; White lines are located at the left
and right screen, please inserts the cards from the bottom of the base (like Pic9)
3,
The maxim distance from finger touch bar end to the screen is about 55CM, the computer image taken by the sensor must be all
included in the projection screen (the red video), people need adjust the sensitivity setting and installation place accordin g to
different environments, Please make sure there are no obvious bright spot (or green light) in the red video of the calibration software;
4,
Q: Why the calibration screen looks dark after we finish the calibration?
