background image

 

 

 

 

Document revisions 

 

Revision number 

Notes 

Date released 

20220607-1 

Santinel WiFi and Santinel Cellular pairing 
procedures updated. 
Covers firmware V. 1.0.0 

06/2022 

20210909-1 

First version available. 
Covers firmware V. 1.0.0 

09/2021 

 
 
 
 
 
 
 
 
 
 

GLP® Santinel WiFi / Cellular - Hand Disinfecting Station User Manual 

 

© 2020-22 German Light Products GmbH. All rights reserved. 

The marks ‘GLP’ and ‘German Light Products’ are trademarks registered as the property of German 

Light Products GmbH in Germany, in the United States of America and in other countries. 

The information contained in this document is subject to change without notice. German Light 
Products GmbH and all affiliated companies disclaim liability for any injury, damage, direct or 
indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to 
use or reliance on the information contained in this document. 
Head office: 
German Light Products GmbH (GLP), Industriestrasse 2, 76307 Karlsbad, Germany 
Tel (Germany): +49  7248  92719 - 0 
Service & Support EMEA: 
GLP, Industriestrasse 2, 76307 Karlsbad, Germany 
Tel. (Germany): +49  7248  9271955 
Email: support@glp.de 
www.glp.de 

Service & Support USA: 
GLP USA, 1145 Arroyo St., Ste. A, 91340 San Fernando, California 
Tel (USA): +1  818  767  8899 
Support (US): info@germanlightproducts.com 
www.germanlightproducts.com 

 

Summary of Contents for Santinel Cellular





































Reviews: