GlucoMen Day PENCAP, User Manual

12

Display guide 

/

English

/ 4.2

Blinded sensor

The  optical  sensor  of  the  Device  is 

blinded  when  exposed  directly  to 

intense  light  (e.g.  bright  sunlight) 

and cannot detect the activity of the 

dose-  knob.  The  screen  will  display 

the blinded sensor warning.

If  this  happens,  take  the  device  out 

of the intense light until the warning 

is  no  longer  displayed.  The  Device 

can now be used normally.

/ 4.3

Spillage

Should  an  accident  occur  exposing  GlucoMen  Day  PENCAP  to  a  liquid 

(e.g. a cup getting knocked over causing spillage), remove it from the 

pen, dry it by wiping gently with a clean dry cloth, and set the Device 

aside for several hours before resuming its use.

CAUTION

The Lithium-Ion battery should not be exposed to water or other liquids.

/ 4.4

System error

If  the  InsulCheck  insignia  is  di-

splayed  periodically  on  the  screen, 

this means that the Device has a re-

peating system error which it cannot 

recover  from.  If  that  happens,  stop 

using the Device and contact A. Me-

narini Diagnostics Customer Service 

(reported on the box). 

/ 4.5

Unsuccessful pairing

There are a number of reasons for an 

unsuccessful Bluetooth

®

 pairing.

The most common reasons are:

1.

It may be that the passkey was mistyped into the app or pho-

ne. Repeat the process or follow the instructions on your phone 

or app.

2.

Check that your smartphone supports connection to your 

GlucoMen Day PENCAP, and that you are using the GlucoLog 

RapidCalc app.

3.

The Bluetooth

®

 functionality is implemented in different ways 

by mobile device manufacturers. There may be a incompatibility 

issue which cannot be resolved.

If you still cannot pair with the desired client device, please contact 

A. Menarini Diagnostics Customer Service (reported on the box).

/ 5

Display guide

Graphic

Reference 

GlucoMen  Day  PENCAP  insignia  is  displayed 

on the screen for a few seconds after the De-

vice is powered on. It is also displayed after 

a  factory  reset.  The  insignia  is  generally  fol-

lowed by displaying the Firmware Version on 

the Device for a few seconds.

When the screen is turned on, the timer is di-

splayed  on  it.  The  timer  counts  up  the  time 

since the previous dialling-in of the dose- knob 

(during injection) was detected. The timer di-

splays the time since the previous injection.

Insigna displayed

periodically