background image

6

Oper

ating ins

tructions 

 

/

 

English

2.

 

The timer stops counting up.

3.

 

Perform the injection 

according to your therapy.

4.

 The timer resets due to the 

new injection and starts counting 

up.

/ 3.3

 

Low dose injections

Depending  on  the  pen  model,  the  Device  cannot  detect  injections  for 

doses below 2 or 3 units. 

To make sure that injections are detected for doses below these thre-

sholds:

1.

 Dial out a higher dose, for example 6 units. This will trigger the 

dose-knob sensing.

2.

 Dial the dose-knob back in to the actual low dose to be taken 

(e.g. 1 or 2 units) and then complete the injection.

 

CAUTION

 

GlucoMen Day PENCAP does not detect actual injections. Its operation 

is based on sensing the changes in the position of the dose-knob when 

the user interacts with it during injections.

 

Playing or “fiddling” with the dose-knob of the pen is not allowed 

when  the  Device  is  mounted  on  the  pen.  Such  unwanted  actions,  for 

example, dialling out and then in a dose without injecting, can cause the 

Device to display and record incorrect timing information.

/ 3.4

 

Checking battery status

1.

 Tap the touch button to turn 

on the screen and activate 

Bluetooth

®

.

2.

 If the battery is low, a battery 

warning

1

 is displayed for a few 

seconds.

Keep your Device charged for 

smooth operation. Your injection 

time will be detected even after a 

battery warning is displayed, but 

it will shut down soon after the 

blinking critical battery warning.

1

Refer to the display guide in SECTION 5.

Summary of Contents for Day PENCAP





















Reviews: