SETTING METER
PARAMETERS
SETTING THE TIME AND DATE
Time and Date should be set prior to testing if you
plan to download the results into software or to
review your memory to check when a test was
done.
To set the time and date:
1
Press to turn meter on.
2
When the last test result, time, date and a
moving strip appear, press BUTTON for 3
seconds (at the beep sound , the year will flash
- for example for the year 2004, number 4 will
appear).
3
Press and release the or button to obtain
the desired year.
4
Press and release to move to the month,
year, hour, minute and unit of measure.
5
Press and release or button to obtain the
desired result. Upon changing the minute, the
unit will flash. Press or button for 3
seconds to change the unit of measurement to
mg/dL or mmol/L.
10
