15
These parameters can
ONLY be changed
in the setting mode.
If your meter is idle for 3 minutes during the setting mode, it
will switch off automatically.
NOTE
If you do not want to set an alarm, press SET to skip this step.
If you want to turn off an alarm, find the alarm number by pressing SET
in the setting mode. Press M button to change from “ON” to “OFF”.
At the time of your alarm, the meter will beep and automatically turn
on. You can press M button to silence the alarm and insert a test strip
to begin testing. If you do not press M button, the meter will beep for
2 minutes then switch off. If you do not want to test at this time, press
M button to switch off the meter.
Congratulations! You have completed all settings!
5. Setting a reminder alarm
You may set up any or all of the reminder alarms
(1-4). The meter displays “On” or “OFF” and
,
press M button to turn on or turn off the first
reminder
alarm.
Press M button to select “On”, then press SET to
set the hour. When the hour is flashing, press M
button to add an hour. Press SET to confirm and go
to minutes. Press M button to add one minute. Hold
M button longer to add faster. Press SET to confirm
and go to the next alarm setting.
Summary of Contents for 311-4277100 SERIES
