background image

23

 Do not press the puncture site against your test strip or try to 

smear the blood.

 If you do not apply a blood sample to the test strip within 3        

minutes, your meter will automatically turn off. You must remove 

and reinsert the test strip to start a new test.

 

The confirmation window should be filled with blood before your 

meter begins to count down. 

NEVER

 try to add more blood to your 

test strip after the drop of blood has moved away. 

Discard the 

used test strip and retest with a new one.

 If you have trouble filling the confirmation window, please contact 

your healthcare professional or GlucoRx Customer care on   

01483 755133 for assistance.

NOTE

5.Read the Result

The result of your blood glucose test will 

appear after the meter counts to 0. This 

reading will automatically be stored in the 

memory.

6.Eject the Used Test Strip and Remove the 

Lancet

The used lancet and test strip may be biohazardous. Please 

discard them carefully according to your local regulations.

WARNING

To eject your test strip, point the strip at a sharps 

disposal container. Your meter will turn itself off 

automatically after the test strip is ejected.

Always follow the instructions in the lancing 

device insert when removing the lancet.

Summary of Contents for 311-4277100 SERIES














































Reviews: