94003 GM-Racing XG-4i 2.0 FHSS Race Spec 38
English
SERVICE AND REPAIR
In problem cases, or for questions and repairs, please contact the service department in
your country (see page 59) or:
GRAUPNER-Service, Henriettenstrasse 94-96, D-73230 Kirchheim/Teck,
Tel. +49/1805/472876
7. TECHN. DATA TRANSMITTER:
RECEIVER:
Frequency............................. 2.4 Ghz FHSS....................... 2.4 Ghz FHSS
Power Requirement................7.2 – 9 V DC........................ 4.8 - 6.0 V DC
Channels...............................2.......................................... 3
Current Drain........................ ca. 150 mA (9 V).................. ca. 50 mA
ST.D/R range......................... 0% - 120%
Temperature (working)...........0° ~ +70° C
Spare parts:
94002.1
Receiver 2,4Ghz for XG-4i 2.0 FHSS
94000.3
Receiver - Antenna 2,4Ghz
94000.6
Antenna 2,4Ghz für XG-6i Transmitter
94004.1
Aluminum Transmitter Case for XG-Series
movement after the adjustment
When trim movement is goes to extremes
That means if you make a lot of the trim movement to get the servo to the neutral position,
please recenter the servo horn closer to the neutral position and inspect your throttle linka-
ge.
ENVIRONMENTAL PROTECTION NOTES
When this product comes to the end of its useful life, you must not dispose of it in
the ordinary domestic waste. The correct method of disposal is to take it to your
local collection point for recycling electrical and electronic equipment. The symbol
shown here, which may be found on the product itself, in the operating instructions
or on the packaging, indicates that this is the case.
Individual markings indicate which materials can be recycled and re-used. You can make an
important contribution to the protection of our common environment by re-using the product,
recycling the basic materials or recycling redundant equipment in other ways.
Remove batteries from your device and dispose of them at your local collection point for bat-
teries.
In case of R/C models, you have to remove electronic parts like servos, receiver or speed con-
troller from the product in question, and these parts must be disposed of with a corresponding
collection point for electrical scrap.
If you don’t know the location of your nearest disposal centre, please enquire at your local
council of
fi
ce.
LIABILITY FOR PRINTING ERRORS EXCLUDED!
WE RESERVE THE RIGHT TO INTRODUCE MODIFICATIONS!
Summary of Contents for XG-4i
Page 64: ...02 2011 V1 0 ...
