Shifting
Upshifting the Axle
To shift from Low to High Range:
1. Press the bottom of the switch to shift the axle
control from Low to High.
2. Release the accelerator pedal until the shift
applies.
3. Then push the accelerator pedal.
Axle upshift can be abrupt, causing the vehicle to jerk.
Release the accelerator slowly for a smooth shift. For
manual transmissions, use the clutch while pressing the
accelerator for a smooth shift.
Downshifting the Axle
To shift from High to Low Range:
1. Press the top of the switch to shift from High to
Low Range.
2. Release the accelerator pedal.
3. Then push the accelerator pedal slowly until the
axle shifts.
Split Upshift (Manual Transmissions Only)
To downshift the axle with a transmission upshift:
1. Push the clutch.
2. Shift the Transmission to a higher gear.
3. Shift the axle control from High to Low Range.
4. Release the clutch.
5. Push the accelerator pedal until the axle shifts.
Split Downshift (Manual
Transmission Only)
To upshift the axle with a transmission downshift:
1. Shift the axle control from Low to High Range.
2. Push the clutch.
3. Shift the transmission to a lower gear.
4. Release the clutch.
5. Push the accelerator pedal until the axle shifts.
2-22
Summary of Contents for 2010 T-Series
