Black plate (20,1)
GMC Sierra Denali Owner Manual - 2013 - 2nd Edition - 8/27/12
5-20
Instruments and Controls
on when the vehicle is placed in
ON/RUN, as a check to show it is
working. If it does not, have the
vehicle serviced by your dealer. See
Ignition Positions on page 9
‑
24
.
If the malfunction indicator lamp
comes on while the engine is
running, this indicates that the
OBD II system has detected a
problem and diagnosis and service
might be required.
Malfunctions often are indicated by
the system before any problem is
apparent. Being aware of the light
can prevent more serious damage
to the vehicle. This system also
assists the service technician in
correctly diagnosing any
malfunction.
Notice:
If the vehicle is
continually driven with this light
on, the emission controls might
not work as well, the vehicle fuel
economy might not be as good,
and the engine might not run as
smoothly. This could lead to
costly repairs that might not be
covered by the vehicle warranty.
Notice:
Modifications made to the
engine, transmission, exhaust,
intake, or fuel system of the
vehicle or the replacement of the
original tires with other than
those of the same Tire
Performance Criteria (TPC) can
affect the vehicle's emission
controls and can cause this light
to come on. Modifications to
these systems could lead to
costly repairs not covered by the
vehicle warranty. This could also
result in a failure to pass a
required Emission Inspection/
Maintenance test. See
Accessories and Modifications on
page 10
‑
3
.
This light comes on during a
malfunction in one of two ways:
Light Flashing:
A misfire condition
has been detected. A misfire
increases vehicle emissions and
could damage the emission control
system on the vehicle. Diagnosis
and service might be required.
To prevent more serious damage to
the vehicle:
.
Reduce vehicle speed.
.
Avoid hard accelerations.
.
Avoid steep uphill grades.
.
If towing a trailer, reduce the
amount of cargo being hauled as
soon as it is possible.
If the light continues to flash, find a
safe place to stop and park the
vehicle. Turn the vehicle off, wait at
least 10 seconds, and restart the
engine. If the light is still flashing,
follow the previous steps and see
your dealer for service as soon as
possible.
Summary of Contents for 2013 GMC Sierra Denali
Page 30: ...Black plate 24 1 GMC Sierra Denali Owner Manual 2013 2nd Edition 8 27 12 1 24 In Brief 2 NOTES...
Page 166: ...Black plate 10 1 GMC Sierra Denali Owner Manual 2013 2nd Edition 8 27 12 6 10 Lighting 2 NOTES...
Page 347: ...Black plate 35 1 GMC Sierra Denali Owner Manual 2013 2nd Edition 8 27 12 Vehicle Care 10 35...
Page 470: ...Black plate 14 1 GMC Sierra Denali Owner Manual 2013 2nd Edition 8 27 12 i 14 INDEX 2 NOTES...
