2
Contents
Warranty Power Tools
Whilst every effort is made to ensure your complete
satisfaction with this tool, occasionally, due to the mass
manufacturing techniques, a tool may not live up to our
required level of performance and you may need the
assistance of our service department.
This product is warranted for a 2-year period for home
domestic use from the date of the original purchase.
If found to be defective in materials or workmanship,
the tool or the offending faulty component will be repaired
or replaced free of charge with another of the same item.
A small freight charge may apply. Proof of purchase is
essential. We reserve the right to reject any claim where
the purchase cannot be verified.
This warranty does not include damage or defects to the
tool caused by or resulting from abuse, accidents,
alterations or commercial or business use. It also does not
cover any bonus items or included accessories. Only the
powertool is covered under this warranty.
With continuing product development, changes may have
occurred which render the product received slightly
different to that shown in this instruction manual.
Please ensure that you store your receipt in a safe place.
Conditions apply to the above warranty. For full details of
the warranty terms and conditions please refer to our
website – www.gmcompany.com
For prompt service we suggest you log your service
request online - www.gmcservice.com.au, should you
not have access to the internet, please contact our
service department on 1300 880 001 (Australia)
or 0800 445 721 (New Zealand).
Warranty
2
Introduction
3
Environmental protection
3
Description of symbols
3
Specifications
3
General safety rules
4
Additional safety rules for drills
5
Additional safety rules for the charging system
6
Additional safety rules for the battery pack
7
Discharging your battery
7
Know your product
8
Accessories
9
Installing and removing the battery pack
9
Battery charging
9
To obtain the best life for the battery
10
Switching on and off
10
Forward/reverse control
10
2 Speed gearbox
11
Variable speed
11
Removing the adjustment collar and nose cone assembly
11
Fitting the magnetic bit holder
12
Fitting the adjustment collar and nose cone assembly
12
Adjusting the driving depth of screws
13
Operation
13
Hints for use
14
Maintenance
14
General inspection
14
