GBESS 2.4_4.8KWH system user manual
40
4.2 Wi-Fi
4.2.1 Wi-Fi Function
GEatom103KHF battery inverter has integrated Wi-Fi module. So the user can be connected to the
Internet after Wi-Fi-connecting and setting. Then log in the GMDE web portal or GMDE APP on your
smart phone, you can monitor your system status timely and remotely.
Before setting the Wi-Fi, pls make sure
1)
The Wi-Fi indication light on Geatom103KHF panel is lighting
;
2)
Wi-Fi signal is available on the installation site for the antenna integrated in the inverter
Figure 55 Wi-Fi Antenna
4.2.2 Wi-Fi Configuration
4.2.2.1Get Connected with the Inverter Wi-Fi
End user can connect to the Wi-Fi generated by inverter via smart ends like smart phone, PC or iPad
etc. Choose the Wi-Fi portal created by the corresponding inverter, whose network name is
GMDE_XXXXXXXX (XXXXXXXX part is the Monitor SN), as shown in figure below.
Figure 56 GEatom103KHF Wi-Fi Network
Note: in this step above, the most important thing is to power on the inverter and find out the Wi-Fi
generated by the inverter from the WLAN options page on your Mobile/ Ipad /computer.
After connecting to the inverter Wi-Fi portal, open your Internet browser, input 11.11.11.1 to enter
