PA G E 3 6
I N S T R U C T I O N M A N UA L
G - C O M B O
4-4 GPS Settings
To go to the GPS settings:
1 Press and hold
MENU
.
2 Select the
GPS
icon.
When the GPS device is connected properly, the GPS settings
provide the access to GPS functions and features connected
with the satellites information used for further navigation.
4-4-1 GPS Source
Select a source of GPS signals
Internal:
Select this option when unit has an internal
GPS antenna.
NMEA0183 & NMEA2000:
Select this option when using
an external GPS or DGPS antenna via NMEA.
4-4-2 DGPS Source
Select WAAS/EGNOS when you want to utilize DGPS.
4-4-3 Static Navigation
This option is very useful when the boat stops or moves very
slowly. This option allows you to set a minimum speed at which
movement is assumed. The value range is from 0.00 to 9.99.
4-4-4 Speed Filter and Course Filter
Occasional waves and wind at sea affect the boat speed and
course. In order to have stable boat speed and course, the unit
calculates these factors to give the value of stable speed and
course information.
4-4-5 Lat/Lon d.p’s
Select the number of last reading of Lat/Lon to be sent to other
marine electronics.
4-4-6 Ship speed
To have more precise boat speed and course, you can select
your boat speed. Mid is highly recommended option for the
most of common boat.
4-4-7 Magnetic Variation
This option compensates the difference between true north
and magnetic north.
4-5 Track & Log Settings
To go to the tracking and log settings:
1 Press and hold
MENU
.
2 Select the
track & log
icon.
v
The unit has the capability to store 10 individual tracks and
record up to 15,000 track points. Before using the track
function you will need to setup the track function that suits
your boat.
4-5-1 Track
Record
Off
: Stop the recording of a track.
1 to 10 (select a track number): Start a recording of the
boat’s course.
Display
Off:
Display no track on the chart.
1 to 5 (select a track number): Display a selected track on
the chart.
Record colour
Select the colour for recording the track.
Thickness
Select the thickness of recorded track.
Plotting Interval
Select the method of plotting interval between time
and distance.
Distance
Select the distance of plotting interval.
Time
Select the time of plotting interval.
Delete track
Delete a selected track record
4-5-2 Logs
Reset trip dist
Shows you the trip distance. If you select this option it resets
the trip distance.
Reset total dist
Shows you the total trip distance. If you select this option it
resets the total trip distance.
