1OP1
0
30 – February 2018
Page 5
Safety
Fall Hazards
DO NOT sit, stand or climb on the platform guard rails. Maintain a firm footing on the
platform floor at all times.
DO NOT exit the platform when elevated
Keep the platform floor clear of debris.
DO NOT fasten a fall restraint lanyard to an adjacent structure.
Ensure that all gates are properly closed and secured before operating the machine.
Operators must comply with employer and job site rules and governmental regulations
regarding the use of personal protective equipment.
Collision Hazards
Check for equipment, materials or other obstructions before moving.
Check for overhead obstructions before
operating
.
Check for crushing hazards when holding the platform rail before
operating
.
Be aware of limited sight distance and blind spots when operating.
DO NOT operate in the path of any crane unless the controls of the crane have been locked
out and/or precautions have been taken to prevent any possible collision.
H
orseplay
is
PROHIBITTED.
Watch for personnel and obstructions below the platform when lowering the platform.
Keep hands and limbs out of scissors.
Use common sense and planning when operating the machine with the controller from the
ground. Maintain safe distances between the operator, the machine and fixed objects.
DO NOT CLIMB ON RAILS
13309
13313
13312
13311
1030-PA
