Page 17
GMG 2646E-OR --- 4646E-OR
Operator’s manual
Series: 2646
E-OR
--- 4646
E-OR
November 2020 #81250.1
Check the area above and around the machine for obstructions and electrical
power lines before operating the machine.
3ljƾNjƺǍǂLjLJƿNjLjdž0LjǐƾNj'LjLJǍNjLjDžnj
1. Turn the KEY SWITCH to LOWER CONTROLS.
2. Pull the EMERGENCY STOP to the ON position at both the lower and platform controls.
3. Be sure the battery pack is connected by checking that the RED disconnect switch is pulled out
before operating the machine.
4. Move the UP/DOWN TOGGLE SWITCH according to the markings on the control panel to posi-
tion platform from ground controls.
Check the area above and around the machine for obstructions and electrical power
lines before operating the machine.
3ljƾNjƺǍǂLjLJƿNjLjdž4DžƺǍƿLjNjdž'LjLJǍNjLjDžnj
1. Turn the KEY SWITCH to PLATFORM CONTROLS from base controls.
2. Pull the EMERGENCY STOP out to the ON position at both the lower and platform controls.
3. Be sure the battery pack is connected by checking that the RED disconnect switch is pulled out
before operating the machine.
8Lj4LjnjǂǍǂLjLJ4DžƺǍƿLjNjdž
1. Activate the Lifting-functions by pressing the LIFT-FUNCTION BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Pull the CONTROL HANDLE forward/reverse to raise the platform.
4. Push the CONTROL HANDLE forward/reverse to lower the platform
8Lj7ǍƾƾNj
1. Activate the Drive-functions by pressing the DRIVE-FUNCTIONS BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
3. Turn the steer wheels with the THUMB ROCKER SWITCH located on the top of the CON-
TROL HANDLE.
GMG
GMG
Summary of Contents for 2646E-OR
Page 39: ...www GoGMG com Page 36 2...
