Page 18
www.GoGMG.com
8Lj(NjǂǏƾ
1. Activate the Drive-functions by pressing the DRIVE-FUNCTION BUTTON.
2. Press and hold the FUNCTION ENABLE SWITCH on the CONTROL HANDLE.
•
Increase speed: Slowly move the CONTROL HANDLE off center.
•
Push the CONTROL HANDLE forward to move forward. Pull the CONTROL HANDLE
reverse to move reverse.
•
Decrease speed: Slowly move the CONTROL HANDLE toward center.
•
Stop: Return the control handle to center or release the FUNCTION ENABLE SWITCH. Use
the color-coded direction arrows on the platform controls to identify the direction the ma-
chine will travel.
Machine travel speed is restricted when the platform is raised.
Battery condition will affect machine performance. Machine drive speed and function speed will drop
when the battery level indicator is flashing.
8Lj6ƾƽǎƼƾ(NjǂǏƾ7ljƾƾƽ
The drive controls can operate in two different drive speed modes.
•
When the Drive Speed Select button (turtle icon) is pushed in and the LED light is on, slow drive
speed mode is active.
•
When the Drive Speed Select button (turtle icon) is not pushed in and the LED light is not on,
fast drive speed mode is active.
3ǎǍNjǂǀǀƾNj3ljƾNjƺǍǂLjLJ
Only lower the outriggers when the machine is on a firm surface. The surface must be capable of
supporting the maximum ground pressure per wheel/outrigger (see specifications).
The outrigger control buttons are located on the the Upper Control Box.
Extend
Press the AUTO LEVEL Button to engage outrigger operation.
Move the Joystick in the forward position to deploy the outriggers.
•
The outriggers will extend and level the machine. When the machine is level and ready to oper-
ate, the outriggers will stop automatically.
•
The Drive Enable Indicator will turn OFF, indicating that outriggers are down and machine drive
function is disabled.
Retract
Press the AUTO LEVEL Button to engage outrigger operation.
Move the Joystick in the reverse position to retract the outriggers.
•
The outriggers will retract.
•
The Drive Enable Indicator will turn ON, indicating that the outriggers are up and machine drive
function is enabled.
Manual Operation of Outriggers
•
Manual operation of individual outriggers is possible using the Manual Level Switches.
7ǁǎǍƽLjǐLJ4NjLjƼƾƽǎNjƾ
7ǁǎǍƽLjǐLJ4NjLjƼƾƽǎNjƾ
•
When finished with the machine, place the platform in the stowed position.
•
Park the machine on a level surface.
•
Turn the Selector Key Switch to the OFF position and remove the key to prevent unauthorized
use.
•
Carefully exit the platform using a constant three (3) point dismount/grip.
GMG
GMG
*YRGXMSR8IWXWERH3TIVEXMRK-RWXVYGXMSRW
Summary of Contents for 2646E-OR
Page 39: ...www GoGMG com Page 36 2...
