Page 5
GMG 2646E-OR --- 4646E-OR
Operator’s manual
Series: 2646
E-OR
--- 4646
E-OR
November 2020 #81250.1
8ǂljLjǏƾNj,ƺǓƺNjƽnj
DO NOT
exceed the maximum platform capacity. The weight of options and
accessories will reduce the rated platform capacity and must be factored into the
total platform load. Refer to the decals on the options.
DO NOT
elevate the platform when the machine is on a surface that is soft
and / or on a slope.
DO NOT
depend on the tilt alarm as a level indicator.
STOP if the tilt alarm sounds and the red light illuminates when the platform is
raised. Use extreme caution to lower the platform. Move the machine to a rm,
level surface.
Driving:
DO NOT
drive the machine on a slope that exceeds
the maximum uphill or downhill slope rating. Slope rating applies to machines in
the stowed position.
Driving in stowed position: use extreme care and reduce speed when driving
across uneven terrain, debris, unstable or slippery surfaces, and near holes or
drop-offs.
Driving with the platform elevated:
DO NOT
drive on or near uneven terrain,
unstable surfaces, curbs, drop-offs or other hazardous conditions.
DO NOT
push or pull toward any object outside the platform.
DO NOT
push the machine or other objects with the platform.
DO NOT
contact adjacent structures with the platform.
DO NOT
use the platform controls to free a platform that is caught, snagged or
otherwise prevented from normal motion by an adjacent structure. For outdoor
rated machines,
DO NOT
elevate the platform when wind speeds are in excess
12,5 m/s. If wind speeds exceed 12,5 m/s when the platform is elevated, carefully
lower the platform and discontinue operation.
DO NOT
increase the surface area of the platform (i.e. cover the rails with tarp
or plywood). Increased surface area exposed to the wind will decrease machine
stability.
DO NOT
attach overhanging loads or use the machine as a crane.
DO NOT
place loads outside the platform perimeter.
NEVER
transport tools and materials unless they are firmly secured. Secure all
tools and loose materials.
NEVER
alter or disable any machine components.
NEVER
replace any part of the machine with items of different weight or
specification.
NEVER
modify or alter the work platform without written permission from GMG.
NEVER
place ladders or scaffolds in the platform or against any part of the
machine.
NEVER
use the machine on a moving or mobile surface or vehicle.
Ensure that all tires are in good condition and lug nuts are properly torqued.
DO NOT
operate the machine with the chassis trays open.
DO NOT
alter or disable the limit switches or machine components that in any
way affect safety and stability.
DO NOT
replace items critical to machine stability with items of different weight
or specification.
DO NOT
modify or alter this machine without prior written
permission from the manufacturer.
DO NOT
use batteries that weigh less than the original equipment. Each battery
must weigh 25 kg. The batteries must weigh a minimum of 50 kg.
Maximum Allowable Side Force
45lbs (200N)
13304
13306
13305
13307
13308
DO NOT OVERLOAD
DO NOT DRIVE ON IRREGULAR
OR UNSTABLE SURFACE
DO NOT PUSH OR PULL
OBJECTS OUTSIDE PLATFORM
DO NOT ELEVATE IN
WINDY CONDITIONS
DO NOT USE AS CRANE
Summary of Contents for 2646E-OR
Page 39: ...www GoGMG com Page 36 2...
