Page 16
2669-RT / 3369-RT / 4069RT
Operating Instructions & Function Tests
Lift/Lower
Pay careful attention during platform lowering to avoid collision with personnel or objects.
• Press and hold the Lift button on the Base Control Panel to lift the platform.
• Press and hold the Lower button on the Base Control Panel to lower the
platform.
Test Operation
• Raise the platform until it stops. Platform should lift to full height.
• Lower the platform until it stops. Scissor assembly should close completely.
• Releasing the switch will stop Lift/Lower function.
• Pressing the Emergency Stop Switch will stop lift/lower function.
Platform Control Operation and Test
Entering The Platform
Personnel shall enter and exit the platform only at the Personnel Entry Gate.
When entering or exiting the platform, use the hand holds and entry ladder to
maintain three point contact with the machine.
Check that the gate is properly secured before operation.
1OP69
– January 2018
