Section
3394RT---6094RT Scissor Lifts -
Service Pack
Page
4
Control
Description
1
Emergency Stop Switch
Push IN to stop all functions
Pull OUT to reset
2
Lift / Drive Selector Switch
Push to the LEFT to LIFT and to the RIGHT to DRIVE
3
Horn Button
Press and hold to sound warning horn
4
Engine Start Switch
Push UP to start engine
5
Lights and Powered Accessory
Switch
Push DOWN to power lights and UP to power accessories
6
Engine Preheat Switch
Push UP to preheat engine
7
High / Low Torque Switch
Push to the LEFT for engine high torque mode and to the RIGHT for high
speed mode
8
High / Low Engine RPM Switch
Push to the LEFT for engine low RPM
Push to the RIGHT for engine high RPM
9
FL Outrigger Switch
Push UP and hold to raise the LEFT front outrigger
10
FR Outrigger Swtich
Push UP and hold to raise the RIGHT front outrigger
11
Auto Level Switch
Push UP to auto level the machine and push DOWN to auto retract all 4
outriggers
12
RL Outrigger Switch
Push UP and hold to raise the LEFT rear outrigger
13
RR Outrigger Switch
Push UP and hold to raise the RIGHT rear outrigger
14
Joystick
Drive
Controls Forward and Reverse travel
Lift
Move toward operator to ELEVATE platform. Lift speed
increases proportional to the Joystick movement.
Move away from operator to LOWER platform.
15
FL OR Indicator
Light indicates that the left front outrigger is in operation
16
FR OR Indicator
Light indicates that the right front outrigger is in operation
17
RR OR Indicator
Light indicates that the left rear outrigger is in operation
18
RL OR Indicator
Light indicates that the right rear outrigger is in operation
19
Tilt Indicator
Light indicates the machine is over the allowed tilt angle
(alarm will also sound)
20
Overload Indicator
Light indicates the machine has more than the max allowed weight on it
(alarm will also sound)
21
Elevated Height Indicator
Light indicates that the machine is past the height designating the
machine as “elevated”
22
Steer Switch
Push LEFT side of switch to steer LEFT
Push RIGHT side of switch to steer RIGHT
23
Function Enable Switch
Squeeze the top or bottom of the enable switch and hold to enable DRIVE,
LIFT, and STEER functions
2
- Component Locations
Summary of Contents for 3394-RT
Page 2: ...3394RT 6094RT Scissor Lifts Service Pack Page i Revision History Date Update Reason...
Page 28: ...3394RT 6094RT Scissor Lifts Service Pack Page 23 Notes...
Page 29: ...Section 3394RT 6094RT Scissor Lifts Service Pack Page 24 7 Hydraulic Schematic Diagram...
Page 30: ...3394RT 6094RT Scissor Lifts Service Pack Page 25 Notes...
