Tip-over hazard
Manual force cannot be greater than specification when operating, otherwise may cause tipping over.
Table 1-4 Maximum allowable manual force
Model
Manual force
Maximum occupants
$-(
400N /90 lbs force
2
a)
Do not place or attach fixed or overhanging loads to any part of this machine;
b)
Do not place ladders or scaffolds in the platform or against any part of this machine;
c)
Do not transport tools and materials unless they are evenly distributed and can be safely handled by
person(s) in the platform;
d)
Do not use the machine on a moving or mobile surface or vehicle;
e)
Be sure the tires are in good condition and the lug nuts tightened, besides the tightening torque
should be 300N/m(20.2 lb/ft);
f)
Do not drive the machine on a slope that exceeds the maximum uphill, downhill or side slope
rating of the machine. Slope rating applies only to machines in the stowed position.
Table 1-5 Maximum slope rating, stowed position
Maximum slope rating, stowed position
Platform uphill
45% (24°)
Platform downhill
45% (14°)
Side slope
25% (14°)
Note: slope rating is subject to ground conditions with one person in the platform and adequate
traction. Additional platform weight may reduce slope rating.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
