Table 2-3 Platform control panel instruction
No.
Name
1
Drive select switch
2
Platform leveling switch
3 Horn
switch
4
Power/Emergency stop switch
5
Drive direction confirm switch
6
Drive/Steer controller
7
Main boom telescope switch
8
Jib lift switch
9
Platform rotate switch
10
Work light switch
11
Function speed control
12
Main Lift/Swing Controller
13
Tower boom lift switch
14
Emergency Enable Switch
Avoid serious injury, do not operate machine if any control levers switches controlling
platform movement do not return to the OFF or Neutral position when released.
1)
Drive select switch
Provides high speed, and low speed.
a)
The forward position gives maximum drive speed;
b)
The center position allows the machine to be driven in turtle
speed.
Only use the platform leveling override function for slight leveling of the platform when
platform is lowered. Incorrect use could cause the load/occupants to shift or fall. Failure to do
so could result in death or serious injury.
2)
Platform leveling switch
Provide platform leveling controls. This switch is use to adjust platform level in
situations such as ascending/descending a grade.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
