3)
Horn switch
Horn positioned in turntable sounds when pressed the switch.
4)
Power/Emergency stop switch
Push in the platform red Emergency Stop button to the off position;
Power is shut off to the platform functions.when pull out (on), power
turns on to the platform functions.
5)
Drive direction confirm switch
When the boom is swung over the rear tires or further in either direction,the
Drive Orientation indicator will illuminate when the drive function is selected.
Push and release the switch, and within 5 seconds move the Drive/Steer control
to activate drive or steer.Before driving, locate the blue/yellow orientation
arrows on both the chassis and the platform controls. Move the drive controls in
a direction matching the directional arrows.
6)
Drive/Steer controller
Provides drive/steer controls.
Push forward to drive forward, pull back to drive in reverse.
Steering is accomplished via a thumb-activated rocker switch on the end of
the steer handle.
7)
Main boom telescope switch
Provide extension and retraction of the main boom.
8)
Jib lift switch
Provide raising and lowering of the jib.
9)
Platform rotate switch
Provides platform rotate controls.
10) Work light switch
This switch operates the chassis lights if machine is so equipped.
11) Function speed control
This control could adjust the main boom telescoping, tower boom or jib lifting,
and the speed of platform rotation. The speed of jib lift and platform rotation
speed can only be controlled by the function speed knob. The speed of the
turn, turntable rotation and main boom lift can be switched between turtle
speed and rabbit speed.
$-(%RRP/LIW2SHUDWRU¶V0DQXDO
3DJH
