4.3.2 Lifting
a) See serial label and “Technical Parameters” section in this manual for specific machine weight and
total weight of the machine;
b) Place the boom in the stowed position;
c) Remove all loose items from the machine;
d) Properly adjust the rigging to prevent damage to the machine and so the machine remains level.
4.3.3 Securing the Chassis
a) Use chains of ample load capacity;
b) Use a minimum of 4 chains;
c) Adjust the rigging to prevent damage to the chains.
Figure 4-5 Lifting and securing instructions
$-(%RRP/LIW 2SHUDWRU¶V0DQXDO
3DJH
