S
TEP 3
Next, secure the modesty panel to the opposite leg as
shown on the right. If your work station is supplied with a
front support brace attach it to the same leg you attached
the modesty panel to in step 1. Use (2) 1/4"-20 x 1/2" Flange
Head Bolts for each side of the brace and (2) for each side
of the modesty.
S
TEP 4
Hang the wire management tray from the rear modesty
panel as shown. The work surface will hold the modesty
panel in place.
S
TEP 5
Place the work surface as shown on top of the assembled
base. The work surface contains threaded inserts to align
with the provided bypass holes in the legs. Attach the work
surface to the base using (4) 1/4-20 x 1 1/2 Flange head
bolts.
1/4-20 x 1/2” Flange Head Bolt
1/4-20 x 1- 1/2” Flange Head Bolt
