S
TEP 6
Place the work surface as shown on top of the assembled
base. The work surface contains threaded inserts to align
with the provided bypass holes in the legs. Attach the work
surface to the base using (4) 1/4-20 x 1 1/2 Flange head
bolts.
If your work station has a front brace use (4) #14x1” Lag
Bolts to affix the brace to the work surface (all holes may
not be filled)
1/4-20 x 1- 1/2” Flange Head Bolt
#14X1” Lag Bolt
S
TEP 7
If you ordered the optional CPU Rack we will attach it to the
leg now. Using (4) 1/4-20 x 1/2” Flange head bolts, attach
the CPU Rack to the leg as shown.
Finish by installing the grommets into the holes provided in
the work surface if you have not already done so.
