MAIN DEVICES
☞ PAPER GUIDE & PAPER ALIGNMENT GUIDE
To feed substrate straight and it can be adjusted for substrate width.
To make substrates at the center and fix its bolts.
Place the Paper Alighnment Guide at the inner side from Paper Guide by 5mm.
To feed substrate exactly, Paper Guide alignment status is important.
NOTE :
원If substrate size is small, add the support guide on the right picture
to the Paper Alignment Guide.
☞ Tension Adjustment of Conveyor Belt
Long time operation could make conveyor belt loosen.
If the belt is loosen, feeding could not be working properly.
Adjust its tension with Tension Adjustment Bolts that are at Feed Table.
Turn it to the right to increase tension and turn it to the left to decrease it.
(Adjust it with 5mm Wrench that is packed in the machine.)
☞ FILM TENSION HANDLE
To adjust Film Roll tension.
Tension on film can be adjusted for laminated results status.
Basically, film tension is adjusted to remove wrinkle on roller.
To turn the handle to the right to increase its tension and turn it to the left to decrease it.
Tension Adjustment Bolt
for Conveyor Belt
Paper
Alignment
Paper Guide
Paper Alignment Support Guide
24/51
