HOW TO MOVE & INSTALL
☞ HOW TO UNPACK
1. For rust prevention purpose, vacuum packing with aluminum materials is applied to the machine packing.
and the machine is additionally packed in wooden crate. Each wooden plate of the crate is fixed by
screws to avoid external shock.
2. Wooden Crate can be opened by 11mm Box Spanner.
As on the right picture, dismantle the crate and remove the vacuum packing to move it for installation.
☞ HOW TO MOVE
◑ In the below situation, the forklift is required for moving.
1. If the machine would be moved on the uneven surfaced ground.
2. If the machine has to be moved by 10m or longer distance.
3. If the packing is removed for moving.
◑ This bellows are for use of casters for moving.
1. If moving distance is shorter than 10m in the same place of installation.
2. At least 4 persons are required for moving. Push the corner of the machine gently & slowly.
☞ EXPLANATION OF CASTER WHEEL
To move the machine in the same place (short moving).
Caster has its locking device. Then, for moving, it has to be released from the locking status.
To lock or unlock, press "ON(Lock)" lever or press "OFF(Unlock)" lever.
After moving is done, press "ON" to fix the machine.
WARNING
:
The product is heavy, then be careful to move the product to avoid injury or damage of the product.
- Weight for PROTOPIC III-540(DUAL) : 170㎏s (190㎏s), Weight for LAMI TABLE : 75㎏s
UNPACK & INSTALLATION
잠김(ON)
풀림(OFF)
UNLOCK(OFF)
LOCK(ON)
11/48
