29
A. Dust cover
B . Locknut
•
Tighten the locknut.
•
Reinstall the rubber boot.
•
If the free play cannot be set with the
adjuster on the upper end of the throttle
cable, check to see if the cable has a lower
or in line adjustment. Adjust if needed. If
this is not possible check that the throttle
valve is seated correctly. Otherwise replace
the throttle cable.
MAINTENANCE AND ADJUSTMENT
•
Check if the throttle grip moves smoothly
from full open to close, and the throttle closes
quickly by the return spring and operates
completely in all steering positions. If not,
check the throttle cable routing, grip free
play, and cable damage. Then lubricate the
throttle cable.
•
With the engine idling, turn the handlebar
both ways and check if handlebar movement
changes the idling speed. If so, the throttle
cable may be improperly adjusted or
incorrectly routed, or damaged. Be sure to
correct any of these conditions before riding.
⚠
WARNING
Operation with an improperly adjusted,
Incorrectly routed, or damaged cable could
result in an unsafe riding condition.