34
MAINTENANCE AND ADJUSTMENT
Rear brake pad replacement
To change the rear disc brake pads on your motorcycle please adhere to the following guidelines:
RIGHT SIDE
(A)
Caliper assembly
(B)
Brake pad set
Rear brake pad replacement procedure:
1.
Remove rear wheel.
2.
Remove caliper assembly (B).
3.
Remove two hex bolt pins from calliper rear.
4.
Take out brake pads (B)
5.
Place new brake pads in correct position on piston.
6.
Refit two hex bolts into caliper.
7.
Place caliper assembly back into proper position.
8.
Refit rear wheel.
⚠
WARNING
Maintaining proper brake adjustment is crucial to safe operation of your motorcycle. Improper adjustment may
result in brake assembly damage and cause an accident. An accident may cause serious injury or death.