7.
Align the new filter to the sound outlet.
8.
Press the new filter into the opening, and simultaneously pull and rock back and forth until the new
wax filter is in place.
Change wax filters
1.
To remove the old wax guard, insert the removal side of the wax guard tool into the used wax
guard so that the shaft of the tool is touching the rim of the wax guard. Slowly pull the wax guard
straight out.
2.
To insert the new wax guard, gently press the replacement side of the wax guard tool straight into
the hole of the sound outlet until the outer ring lies flush with the outside of the receiver. Pull the tool
straight out - the new wax guard will remain in place.
NOTE:
Pressing on the new filter with the flat side of the wax filter tool can ensure that the filter is
correctly in place.
If a different type of wax filter is used for your hearing aids, or if your hearing aids do not use wax
filters, consult your hearing care professional for guidance.
CAUTION:
Use only original consumables from the manufacturer e.g. wax filters.
How to clean and maintain your hearing aids
37
Summary of Contents for ReSound Key CSI12
Page 1: ...User guide ReSound Custom hearing aids ...
Page 4: ...4 ...
Page 73: ...Notes Additional information 73 ...
Page 74: ...Notes 74 Additional information ...