Troubleshooting
All pedals are tested before leaving GNI’s facility. If you are finding
difficulties, please pay attention to the following details. Most small
problems are easy to solve with a simple checklist:
?
Insert both input and output jacks, or the pedal won turn on.
?
Check if you used the correct sides for input and for output.
?
If using DC adaptor, be sure it respects our specs. Reversed polarity,
wrong tension, etc. may damage the circuitry and compromise
warranty.
?
If using batteries, be sure they are not discharged
?
Check volume levels, wrong connections and broken cables.
?
Keep your unit away from other electrical devices. TVs and other home
appliances can cause interference and noise.
?
Don’t play very close to the amplifier, or directly facing it, in order to
avoid feedback noise.
If you’ve carefully checked your setup and problems persist, please
contact our technical representative at your country for further support
and warranty. If you can’t find our representative’s information, please go
to our website (www.gnipedals.com) and contact us directly.
Specifications
?
Power supply:
9V battery, or adaptor according to our specs.
?
Bypass mode:
True Buffer Bypass
?
Input impedance:
500 k
?
?
Output impedance:
5 k
?
?
Size:
62 x 141 x 110 (mm)
2.44 x 5.55 x 4.33 (in)
?
Weight:
810g (1.8lb)
Specifications may change without notice.
Summary of Contents for Phaser & Flanger
Page 1: ...Phaser Flanger s user s manual ...
Page 8: ......
