17
STEP 9: Attach the Bottle Holder and Pedals
(A)
Attach the rear cover #94 to the bottle holder #105and secure by using 4 x
#104 screws.
(B)
Place the front cover and the rear cover with the bottle holder attached around
the upright tube and secure by using 4 x #29 screws (See Fig. 9A)
(C)
Locate the left and right pedals. Place them on the pedal tubes with the side
opening facing outward away from the machine (see Fig. 9B)
(D)
Secure the pedals to the pedal tube by using 4 x #18 screws.
(E)
Tighten all bolts and screws now.
#29
4
18
8
Fig. 9A
Fig. 9B
