13
This will initiate the following sequence:
1.
Inflate the bellows. This forces the liquid up in the liner. This wets and compresses the crust of skins and
seed (the “cap”)
and takes about 2 minutes.
2.
Then the bellow automatically deflates. This allows the liquid to return to the lower part of the liner and
the” cap”
to disperse. This takes 7 minutes and completes the punch cycle.
The whole punch cycle takes about 15 minutes, and progress is shown on the local control panel screen. The
operation is entirely automatic and only requires initiation by selecting the PUNCH operation and then pressing the
START button. Punch can be cancelled at any time by pressing the CANCEL button. The unit automatically regulates
the inflation pressure to prevent over-inflation. The liquid should rise in the liner, but not overflow.
Time to go for
this step.
The timer starts
once the bellows
reach the preset
pressure.
Press CANCEL to
abort PUNCH at
any time
START
INFLATE
DEFLATE
