26
Now power up the GOfermentor JR unit (
must be updated to firmware 3.00
+). After the startup screen you should
see the following screen on the GOfermentor display:
This indicates that the GOfermentor
is ready to connect to the App.
Android
If it gets stuck in this startup screen:
Cycle power OFF/ON. Hit the SETUP
button within 30 seconds and select
option Reset WIFI. Unit will restart
and show the +add New Device
screen.
Apple
Apple iOS does not let apps connect
to networks automatically so the
procedure must be done manually:
Connect the iOS device to your WiFi
network with strong signal and open
the GOFERMENTOR app.
Click [Add New Device] and Enter
your WiF
i’s network
ID and
password , click [Continue].
Now power GOfermentor on and
wait for unit to fully boot to
“Add
device to App” screen
.
If it hangs on the boot screen it may
be necessary to first enter setup
menu during boot and click [Reset
Wifi].
Click on
Continue
Android
Select which WiFi network
(SSID) you wish the
GOfermentor to connect to:
Click on
Change
to see other
network that are in range. You
can pick any 2.4GHZ network
shown.
Next enter the password for the
selected network.
Click on
Continue
In App press
Ready
.
Next you will see a list of
DEVICES. One will have a box icon
and a name starting with
GOFERM-xxxxx (where xxxxx is 5
letter code unique to the
particular GOfermentor.
6.
Click on this DEVICE
NAME
Apple
Exit GOFERMENTOR app to iOS home screen
(do not close app, keep running in
background).
Open Settings App (grey gears), open WiFi
settings, click on GOFERMENTOR
unit’s wifi:
“GOFERM
-
xxxxx”, this
may cause unit to
reboot and connection will be lost
Once unit fully reboots, wait for unit’s
WiFi
network to appear on the WiFi list again, click
to connect, a blue check will appear next to
network if successful and GOfermentor
unit’s
display
should
remain on “Add device to App”
screen.
Switch back to GOFERMENTOR app, which
should still be on “Check your Device” screen
Click “READY”, then click “JOIN” or “Already
connected”
, then allow app to finish
establishing connection.
4.
If you have no GOfermentors assigned to
this account you will see this screen
Click on
Add new device
