29
A1.2 JR LOCAL CONTROLLER OPERATION
FIRST TIME USE
A WiFi internet connection is required. First set up the SmartPhone app as
described earlier. Now power up JR you should see this screen. It indicates
that the JR is NOT connected to any network and is waiting to connect to the
App.
NORMAL OPERATION
Once the GOfermentor JR has been added to the App, it will automatically connect to the network selected on
power up. Click SETUP to enter SETUP, otherwise it will connect and show the main screen:
The GOfermentor MUST be connected to WiFi internet to provide remote monitoring and control
using the SmartPhone App. Use the SmartPhone App for all operations. The local control panel on the
GOfermentor is for backup and for these operations that are not possible from the App:
1.
Set date/timezone/DST
2.
Reset the WiFi SSID
3.
Update firmware
4.
Change parameters
5.
Perform PRESS/DEFLATE operations
OPERATING THE BUTTONS
The GOfermentor panel has just three buttons so a clever
method is used to select options. If a button has only one
function, then the caption is printed in the center of the
button. If the button has two functions: the function on the
left is printed in white and corresponds to a short click. The
caption on the right is printed in cyan and is activated by a
long click.
Short click selects MODE
Button function corresponds to caption above the button
Indicator
row
Long click selects LOG
