39
RESET WIFI
If you cannot connect to a WiFi network because you moved the unit to another location, or the network no longer
exists then select
Reset WiFi
and press OK. This will make the controller “forget” the network it wants to connect
to. It will now behave as brand-new unconfigured device. Then open the GOfermentor SmartPhone app and add
this as a new device as described in SECTION 6.1. The GOfermentor will then connect to this new network. This
new network (SSID) is then remembered for the next power up.
FIRMWARE UPDATE
GOfermentor JR firmware can be updated from the internet via OTA download. For this, the device MUST be first
be connected the internet via WiFi (SECTION 6.1). To update firmware:
Select
Firmware Update
from the SETUP menu:
1.
Then press
OK
. The download should start automatically
2.
Once the download is installed, the device will ask for a reboot.
3.
Say YES.
4.
After reboot it is recommended to set process parameters -> default
5.
All logs are deleted. All history is deleted.
6.
Device will need to be added to App (see SECTION 6.1)