10 |
Folding Instruction Joint #2
Folding Joint #2
Joint #2 is unfolded by pressing the main tube in the
direction of the upper side of the plank. At the end of
the folding process, the locking lever has to be pushed
to the main tube to simplify the gliding into the recess
of the mounting plate.
Locking l
ev
er
Auffalten Gelenk 2
It is recommended to fold joint #2 with unfolded handle bar. This makes the folding
process very simple and comfortable. Use one hand to hold the main tube and (1)
pull the safety wedge upwards out of the recess in the mounting plate. Now (2)
press the locking lever to the main tube and turn it to the direction of the undersi-
de of the plank. Push the front wheel past the plank, rotate the scooter (the plank)
180° to the upper side and put it on the ground.
1
2
The locking lever is constructed in two parts and con-
sists of the hook that holds the main tube and a clamping
wedge that secures the hook to the rear. Pull the main
tube to the mounting plate. As soon as the main tube lies
