Original Instruction GB
11
Adjust way of assist handle angle
1. Pull the assist handle button as shown in fig. 7.
2. Adjust assist handle to the appropriate location ( fig. 8)
3. Assist handle in the comfortable operation position, then loosen the handle button. (fig. 9, fig.
10)
Fig. 7 Fig. 8 Fig. 9 Fig. 10
Length adjustment of the tool
1. Press the button (fig. 11)
2. Pull the handle, adjust the tube to comfortable length, then loosen the tube button to lock it in
place (fig. 12)
Cable holder use
Note
: In order to avoid detaching the electrical cable, always check that it is firmly attached to
the cable holder before using the trimmer.
1. Make a loop with the electrical cable and push it into the square hole located on rear of the
handle.
2. Place the loop of cable over the end of the cable hook and make sure that it is pulled tight
enough to prevent it coming loose when you use the trimmer (Fig. 13).
Fig. 11
Fig. 12
