6
1
2
STOP/EJECT
REW
FWD
PAUSE
SOURCE
REC
SAVE
ESC
MENU
UP
DOWN
NEXT
PREV
4
5
6
9
0
7
8
COPY
TAPE
POWER
CTR
RESET
MEMORY
VCR/TV
CH
LCV
DSP
PLAY/LOAD
STOP/EJECT
SOURCE
REC
PLAY/LOAD
SLOW
TV VIEW
INDEX
MARK
TRACKING
SLOW SPEED
MUTE
1
2
3
REW
FWD
PAUSE
▲
Tuner Control &
Menu Selection
Deck 1 & 2
Controls
Programming
Controls
TV View
Advanced Function
Controls
Using Your
Remote Control
Your
Remote Control
makes it simple to operate and program your Dual-Deck VCR. Take a moment to learn
where the buttons are located on the
Remote Control
.
The
Remote Control
is divided into six areas. See page 7 for detailed descriptions of the buttons.
Tuner Control & Menu Selection
- With the
CH Up, CH Down
and
Numeric (0-9)
buttons you
can change the channel on your Dual-Deck VCR tuner. The
Numeric
buttons are also used for
setting the clock, calendar, and timer. The
DSP
button displays the
On-Screen Display
on your
TV screen. The
LCV
button is used to revert to the last channel viewed. The
MUTE
button
turns off the sound (press again to restore sound).
Deck Controls
- There are separate controls for Deck 1 and Deck 2. The buttons for both decks
are laid out the same way.
Advanced Function Controls
- These controls work for the deck you are viewing. Use the
TRACKING
buttons during playback to eliminate white streaks in the picture.
SLOW SPEED
buttons decrease or increase the playback speed during
Slow-Motion Playback
. The
MARK
button is used to place an
Index Mark
on a prerecorded videotape. Use the
INDEX
button to
display the
Index Scan/Search Menu
.
TV VIEW
- This button selects the source of the picture you see on your TV screen when the
TV/VCR
button is set to
VCR
.
Programming Controls
- These buttons are used to change menus and settings in
On-Screen
Programming
. When not in a
menu, the
UP
and
DOWN
buttons function as volume
control.
Other Controls
- Buttons that do not fit the other categories are found in the unshaded area.
Follow these instructions to install or replace the
Remote Control
battery:
Remove the battery compartment door on the bottom of the
Remote Control
.
Install one 9 volt battery as indicated on the battery compartment.
Replace the battery compartment door.
To find a complete description of the features mentioned in this section, consult the Index on pages 44 - 45.