7
Using Your
Remote Control
CH
▼
(Channel Down) button
- Press to select the next lower TV channel in
Channel Memory
.
CH
▲
(Channel Up) button
- Press to select the next higher TV channel in
Channel Memory
.
COPY TAPE button
- Press to start and stop
AmeriChrome™ Copy
.
CTR (Counter/Clock Display) button
- Press to switch the
Front Panel Display
between
Clock
and
Tape Counter
.
Tape Counter
is displayed for the most recently viewed deck.
DOWN button
- Press to move down through menu selections during
On-Screen Programming
.
Press to change
settings in the
Set Date and Time Menu
or
Timer Recording Menu
. Press to lower audio volume during normal
operation.
DSP (Display) button
- Displays or clears the
On-Screen Display
on your TV screen. See page 32.
ESC (Escape) button
- Press to exit the current
On-Screen Programming
menu and return to the previous menu. Press
to erase any changes you have made in the
Set Date and Time Menu
or
Timer Recording Menu
. Press to
backspace during
Title Set Up.
FWD (Fast Forward) buttons
- Press to advance the tape when your Dual-Deck VCR is stopped. When your Dual-Deck
VCR is playing, press
Fast Forward
for forward
Picture Scan
; press
Fast Forward
and hold for forward
Jet Search
.
INDEX button
- Press to bring up the
Index Scan/Search Menu
where you select scan or search for a specific location,
previously marked, to quickly advance to.
LCV (Last Channel Viewed) button
- Press to change the channel to the last channel viewed.
MARK button -
Press to place an
Index Mark
on a prerecorded tape.
MEMORY
button -
Press to turn on auto
Memory Stop
. This works for the deck you are currently viewing.
MENU button
- Press to display the
On-Screen Programming Main Menu
on your TV screen. Other menus are
accessed through the
Main Menu
.
MUTE button -
Press to mute audio. Press again to restore audio.
NEXT button
- Press to change the setting of the current menu selection. Press to move to the next menu selection in
the
Set Date and Time Menu
or
Timer Recording Menu
.
NUMERIC (0-9) buttons
- Press for TV channel selection (when the
TV/VCR
selector is set to
VCR
). Press for menu
selection and settings during
On-Screen Programming
.
PAUSE buttons
- Press to temporarily stop the tape while playing or recording. Should not be used for more than 3
minutes at a time. Your Dual-Deck VCR will
Auto Stop
after 5 minutes in record pause, and will
Auto Play
after 5
minutes in play still. Press during
Pause
mode to advance video one frame.
PLAY/LOAD buttons
- Press to play a tape in the deck. Press to continue playing after pause,
Picture Scan
or
Slow-Motion Playback.
Press to load a tape that is in the ejected position (
Remote Load/Eject
must be on). Press
twice for
Double-Speed Playback
.
POWER button
- Press to turn your Dual-Deck VCR on and off. Press to change
Auto Power Off
mode during rewind,
Timer Record
or
One-Touch Record
.
PREV (Previous) button
- Press to change the setting of the current menu selection. Press to move to the previous
menu selection in the
Set Date and Time Menu
or
Timer Recording Menu
.
REC (Record) buttons
- Press to start recording onto a tape. Press to continue recording after
Pause
. Press during
recording to activate
One-Touch Recording.
RESET button
- Press to reset the
Tape Counter
to 0:00. Press to reset all settings while in the
Set Date and Time
Menu
or
Timer Recording Menu
. Press to clear an event in the
Timer Recording Summary
.
REW (Rewind) buttons
- Press to rewind the tape when your Dual-Deck VCR is stopped. When your Dual-Deck VCR is
playing, press
Rewind
for reverse
Picture Scan
; press
Rewind
and hold for reverse
Jet Search
.
SAVE button
- Press to save any changes you have made to the current menu and return to the previous menu. Press to
display
Title Screen
during
Record
mode. Press to advance cursor during
Title Set Up
.
SLOW button
- Press to begin
Slow-Motion Playback
during
Play
mode. Press
Play
to resume normal play.
SLOW SPEED buttons
- Press (left button) to decrease or (right button) to increase
Slow-Motion Playback
speed.
SOURCE buttons
- Press to select the video
Source
to be recorded on each deck.
STOP/EJECT buttons
- Press to stop the tape. Press to eject a stopped tape (
Remote Load/Eject
must be on).
TRACKING buttons
- Press to adjust
Tracking
and to eliminate white streaks in the picture during playback.
TV/VCR button
- Press to select the
Source
of the picture on your TV screen -
TV
for your TV tuner,
VCR
for your
Dual-Deck VCR tuner, tape decks, or Line inputs.
TV VIEW button
- Press to select the
TV View
. Deck 1, Deck 2, Tuner, Line 1 or Line 2 when the
TV/VCR
button is set
to VCR.
UP button
- Press to move up through menu selections during
On-Screen Programming
. Press to change settings in
the
Set Date and Time Menu
or
Timer Recording Menu
. Press to increase audio volume during normal operation.