ECO Spot LED A10 User Manual
Copyright © 2015 Globus New Media LLC
Page 1
Thank you for choosing an ECO Spot™ Gobo projector.
Please read this manual before installing or operating this fixture,
follow the safety precautions listed below and observe all warnings.
Package Contents
Projector with integrated Projection Lens
Test Gobo mounted
Spare Gobo Retaining Ring
User Manual
Safety Information
Follow all local building and electrical codes and apply both, overload and
ground-fault protection.
Handling Instructions
Warranty
One Year from Date of Purchase. Keep your receipt for reference and contact your dealer
in case of warranty issues.
ECO Spot™ LED A10
User Manual
Place your fixture at a suitable place with good air flow.
Keep flammable materials away from the fixture.
Minimum distance to flammable material = 1ft (0.3m).
Do not look directly into the lamp; it can result in eye damage.
Disconnect the fixture from AC power before handling it.
Do not use the fixture if the power cable or power plug is in any way damaged,
defective or wet, or if they show signs of overheating.
Light fixtures should be installed and maintained only by qualified personnel
with experience in lighting equipment and general electrical experience.
Before the initial start-up, please unpack and carefully check for damage
caused during transportation.
When suspending the fixture above ground level, verify that the structure can
hold at least 10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and
use an approved means of secondary attachment such as a safety cable.
